|
FRAME
3 Tonne through frame lift at 3G.
Bolted channel section construction around central welded
aluminium frame.
Variable 6 positions lift point.
4 point skid attachment.
Bump protection on outer frame.
BUOYANCY
4 piece construction for easy removal.
1000 metre rated (2000 metre option).
Optional additional centre core buoyancy block.
PAYLOAD
300 Kg standard.
PERFORMANCE
7 CURVETECH thrusters - 4 vectored HT380's and 3 vertical
HT300's providing :-
| Bollard Pull: |
|
| Forward |
over 800 Kg |
| Lateral |
over 550 Kg |
| Vertical |
over 300 Kg |
Speed in excess of 3.5 knots.
HYDRAULIC SYSTEM
CURVETECH power pack.
Optional dual ended pump system.
100 Hp (shaft) 3000 volt, 3 phase 4 pole.
CURVETECH Thruster Control Unit (TCU).
8 off 77 lpm servo valves.
Integral system relief, soft start and temperature sensor.
2 off Auxiliary Control Units (ACUs).
10 valves with pilot/checks and relief's.
Pressure compensated reservoir assembly with integral LP manifold
and filter.
2 off 10 function Quick Disconnect Panels. HYDROVISION
Compensators throughout (1 and 2.5 pint units).
DIMENSIONS
| Weight in air |
2.8 tonnes |
| Length (with survey frame) |
3900 mm |
| Height |
1900 mm |
| Width |
1830 mm |
CONTROL SYSTEM
96 channel capability Mux system.
INTEL 486 based topside control unit.
Integral diagnostics.
14" colour graphics display.
Auto heading +/- 2 degrees.
Auto depth +/- 150 mm.
Pitch and roll sensors with digital and analogue displays.
Full programmable alarm system.
Auto depth with bathymetric system.
CAMERAS
Up to 5 simultaneous camera capability.
Optional Fibre video transmission.
LIGHTING
5 variable intensity 250 watt lights as standard.
POWER REQUIREMENTS
(Typical 100Hp system)
180 KVA (min) 380-480 volts 3 phase 60Hz.
Return to Rov Index
For more Information
contact ROV.net
Copyright © 1995 DCF Innovative
Design.
Updated 28/09/98
|
